Computer simulation: Difference between revisions

From Citizendium
Jump to navigation Jump to search
imported>David Tribe
m (Protected "Computer simulation" [move=sysop])
imported>Tony Vignaux
m (minor)
Line 124: Line 124:




 
[[Category:Computational science]]
[[Category:Computational science]]
[[Category:CZ Live]]
[[Category:CZ Live]]
[[Category:Computers Workgroup]]
[[Category:Computers Workgroup]]

Revision as of 23:42, 16 February 2007

A computer simulation or a computer model is a computer program that attempts to simulate an abstract model of a particular system. Computer simulations have become a useful part of mathematical modelling of many natural systems in physics (Computational Physics), chemistry and biology, human systems in economics, psychology, and social science and in the process of engineering new technology, to gain insight into the operation of those systems. Traditionally, the formal modeling of systems has been via a mathematical model, which attempts to find analytical solutions to problems which enables the prediction of the behaviour of the system from a set of parameters and initial conditions. Computer simulations build on, and are a useful adjunct to purely mathematical models in science, technology and entertainment.

History

Computer simulation was developed hand-in-hand with the rapid growth of the computer, following its first large-scale deployment during the Manhattan Project in World War II to model the process of nuclear detonation. It was a simulation of 12 hard spheres using a Monte Carlo algorithm. Computer simulation is often used as an adjunct to, or substitution for, modeling systems for which simple closed form analytic solutions are not possible. There are many different types of computer simulation; the common feature they all share is the attempt to generate a sample of representative scenarios for a model in which a complete enumeration of all possible states of the model would be prohibitive or impossible. Computer models were initially used as a supplement for other arguments, but their use later became rather widespread.

Types of computer simulation

Computer models can be classified according to several criteria including:

  • Stochastic or deterministic (and as a special case of deterministic, chaotic) - see External links below for examples of stochastic vs. deterministic simulations
  • Steady-state or dynamic
  • Continuous or discrete (and as an important special case of discrete, discrete event or DE models)
  • Local or distributed.

For example:

  • Steady-state models use equations defining the relationships between elements of the modelled system and attempt to find a state in which the system is in equilibrium. Such models are often used in simulating physical systems, as a simpler modelling case before dynamic simulation is attempted.
  • Dynamic simulations model changes in a system in response to (usually changing) input signals.
  • Stochastic models use random number generators to model chance or random events; they are also called Monte Carlo simulations.
  • A discrete event simulation (DE) manages events in time. Most computer, logic-test and fault-tree simulations are of this type. In this type of simulation, the simulator maintains a queue of events sorted by the simulated time they should occur. The simulator reads the queue and triggers new events as each event is processed. It is not important to execute the simulation in real time. It's often more important to be able to access the data produced by the simulation, to discover logic defects in the design, or the sequence of events.
  • A continuous dynamic simulation performs numerical solution of differential-algebraic equations or differential equations (either partial or ordinary). Periodically, the simulation program solves all the equations, and uses the numbers to change the state and output of the simulation. Applications include flight simulators, racing-car games, chemical process modeling, and simulations of electrical circuits. Originally, these kinds of simulations were actually implemented on analog computers, where the differential equations could be represented directly by various electrical components such as op-amps. By the late 1980s, however, most "analog" simulations were run on conventional digital computers that emulate the behavior of an analog computer.
  • A special type of discrete simulation which does not rely on a model with an underlying equation, but can nonetheless be represented formally, is agent-based simulation. In agent-based simulation, the individual entities (such as molecules, cells, trees or consumers) in the model are represented directly (rather than by their density or concentration) and possess an internal state and set of behaviors or rules which determine how the agent's state is updated from one time-step to the next.
  • distributed models run on a network of interconnected computers, possibly through the Internet. Simulations dispersed across multiple host computers like this are often referred to as "distributed simulations". There are several military standards for distributed simulation, including Aggregate Level Simulation Protocol (ALSP), Distributed Interactive Simulation (DIS) and the High Level Architecture (HLA).

Computer simulation in science

Generic examples of types of computer simulations in science, which are derived from an underlying mathematical description:

Specific examples of computer simulations follow:

  • statistical simulations based upon an agglomeration of a large number of input profiles, such as the forcasting of equilibrium temperature of receiving waters, allowing the gamut of meteorological data to be input for a specific locale. This technique was developed for thermal pollution forecasting .
  • agent based simulation has been used effectively in ecology, where it is often called individual based modeling and has been used in situations for which individual variability in the agents cannot be neglected, such as population dynamics of salmon and trout (most purely mathematical models assume all trout behave identically).
  • computer simulations have also been used to formally model theories of human cognition and performance, e.g. ACT-R
  • Computational fluid dynamics simulations are used to simulate the behaviour of flowing air, water and other fluids. There are one-, two- and three- dimensional models used. A one dimensional model might simulate the effects of water hammer in a pipe. A two-dimensional model might be used to simulate the drag forces on the cross-section of an aeroplane wing. A three-dimensional simulation might estimate the heating and cooling requirements of a large building.

Notable, and sometimes controversial, computer simulations used in science include: Donella Meadows' World3 used in the Limits to Growth, James Lovelock's Daisyworld and Thomas Ray's Tierra.

Pitfalls in computer simulation

Although generally ignored in computer simulations, in strict logic the rules governing floating-point arithmetic still apply. For example, the probabilistic risk analysis of factors determining the success of an oilfield exploration program involves combining samples from a variety of statistical distributions using the Monte Carlo method. These include normal, lognormal, uniform and the triangular distributions. However, a sample from a distribution cannot sustain more significant figures than were present in data or estimates that established those distributions. Thus, abiding by the rules of significance arithmetic, no result of a simulation can sustain more significant figures than were present in the input parameter with the least number of significant figures. If, for instance the net/gross ratio of oil-bearing strata is known to only one significant figure, then the result of the simulation cannot be more precise than one significant figure, although it may be presented as having three or four significant figures.

Computer simulation in practical contexts

Computer simulations are used in a wide variety of practical contexts, such as:

The reliability and the trust people put in computer simulations depends on the validity of the simulation model, therefore verification and validation are of crucial importance in the development of computer simulations. Another important aspect of computer simulations is that of reproducibility of the results, meaning that a simulation model should not provide a different answer for each execution. Although this might seem obvious, this is a special point of attention in stochastic simulations, where random numbers should actually be semi-random numbers. An exception to reproducibility are human in the loop simulations such as flight simulations and computer games. Here a human is part of the simulation and thus influences the outcome in a way that is hard if not impossible to reproduce exactly.

Computer graphics can be used to display the results of a computer simulation. Animations can be used to experience a simulation in real-time e.g. in training simulations. In some cases animations may also be useful in faster than real-time or even slower than real-time modes. For example, faster than real-time animations can be useful in visualizing the buildup of queues in the simulation of humans evacuating a building. Furthermore, simulation results are often aggregated into static images using various ways of scientific visualization.

In debugging, simulating a program execution under test (rather than executing natively) can detect far more errors than the hardware itself can detect and, at the same time, log useful debugging information such as instruction trace, memory alterations and instruction counts. This technique can also detect buffer overflow and similar "hard to detect" errors as well as produce performance information and tuning data.

See also

External links

Organizations

Education

Tools

Examples

References

  • R. Frigg and S. Hartmann, Models in Science. Entry in the Stanford Encyclopedia of Philosophy.
  • S. Hartmann, The World as a Process: Simulations in the Natural and Social Sciences, in: R. Hegselmann et al. (eds.), Modelling and Simulation in the Social Sciences from the Philosophy of Science Point of View, Theory and Decision Library. Dordrecht: Kluwer 1996, 77-100.
  • P. Humphreys, Extending Ourselves: Computational Science, Empiricism, and Scientific Method. Oxford: Oxford University Press, 2004.