Light bulb

From Citizendium
Revision as of 08:39, 17 November 2007 by imported>Robert W King
Jump to navigation Jump to search
This article is a stub and thus not approved.
Main Article
Discussion
Related Articles  [?]
Bibliography  [?]
External Links  [?]
Citable Version  [?]
 
This editable Main Article is under development and subject to a disclaimer.

A light lulb is a sealed body of glass that contains two electrical points of contact, a filament(a coil made of tungsten, that when current is applied, glows brightly) and an amount of an inert gas.

The electric light bulb was originally invented by Thomas Alva Edison in 1879 and patented January 27, 1880 (patent #223898(US)), however multiple inventors and scientists at the time were working to produce an incandescent bulb; in particular Englishman Sir Joseph Swan produced an electric bulb in 1878.

Modern light bulbs

Different types of light bulbs exist today as a result of lighting requirements and energy demands.

  • Compact Flourescent Lights (CFLs) are smaller versions of flourescent lights that are designed to fit into regular lamp sockets. The advantage of CFLs are that they produce as much light as a regular incandescent bulb but with very little power consumption.
  • LEDs, or Light Emitting Diodes, are small, compact sources of light usually integrated into electronics, although they have become more popular in consumer lighting because of the relatively low production cost, low energy demands, and high light output.
  • Halogen light bulbs were invented earlier than CFLs, and are a substitute for regular lighting applications, but the primary disadvantages are that the heat produced by a halogen bulb is much greater than that of an incandescent(and has been the cause of some fires as a result), and also requires a special type of socket. Also, some halogen systems may require an integrated step-down transformer which doesn't necessarily decrease the amount of power consumed, but allows for adjustment to be made from a "dimmer system" in order to control the amount of light produced by each bulb.